Mount-It! LCD TV Wall Mount Bracket with Full Motion Swing Out Tilt and Swivel Articulating Arm for 13-42 Flat Screen Displays with VESA 75 to 200, 44lb Weight Capacity WITH 18″ EXTENSION

August 24, 2018 - Comment

This mount fits the majority of displays in the 23-42″ size range. Specifically, it fits VESA 75×75, 100×100, 200×100, 200×200. If you are unfamiliar with VESA patterns, these are square or rectangular patterns between 3 and 16 inches per side. Weight limit is 44lbs. This mount provides 18″ of extension and collapses to 3.4″ from

Buy Now! $24.99Amazon.com Price
(as of April 19, 2020 11:29 pm EDT - Details)

This mount fits the majority of displays in the 23-42″ size range.

Specifically, it fits VESA 75×75, 100×100, 200×100, 200×200. If you are unfamiliar with VESA patterns, these are square or rectangular patterns between 3 and 16 inches per side.

Weight limit is 44lbs.

This mount provides 18″ of extension and collapses to 3.4″ from the wall.

This is a full motion mount with 360 degrees of rotation, +/- 15 degrees of tilt and 180 degrees of swivel.

The load bearing portions of the mount are constructed from High Grade Steel providing a sturdy and reliable mount and separate cover pieces for the wall plate and pivot joints providing a clean finished look.

The package includes the mount, manual, all necessary installation hardware.

Product Features

  • Single Stud Installation; Swivels: Up to 180
  • Rotation Adjustment: +-15. 15 Tilt, 4 Rotation Adjustment
  • Fits Vesa Patterns: 75×75, 100×100, 200×100, 200×200 ;Upto 44lb
  • 18″ Extension, 180 Degree Swivel
  • Hardware and Instruction Manual Included For Easy Installation

Comments

DwP says:

these worked beautifully. You can see in the provided picture I was at first skeptical, since my Samsung sound bar is complicated and doesn’t contain mounting holes. After researching, the only way to mount my Samsung sound bar is with a Samsung wall mount, however I didn’t want my bar mounted on the wall since my tv is on a swivel mount, so it needed to be attached to the TV. Researching online came up with nothing, so apparently what I done has never been done before?! (I find this odd) So I decided to be creative… Once installed, these worked…

R. Levin says:

A sturdy, practical mount that works well for Sonos Playbar I purchased this mount to attach a Sonos Playbar to a free-standing Panasonic 50″ TV. It worked out very well, and I’m pleased with the result. The mount is secure, with no hint of wobble when the TV is moved (it is on a swivel base).Because I could not find specifications for the mounting holes on the Playbar before buying it, and because the product information for this mount did not include details on the included hardware, I was concerned that I might have to improvise,…

Andrew M says:

excellent small/mid size TV mount. Excellent product, does exactly what I want.I purchased this to mount a 32 inch TV in my guest room / home office, and it works fine. I wanted to avoid a large bracket on the wall.Assembly / Installation: about 10 minutes.Mounting the bracket to TV is standard 4 hole system, screws and spacers are includedArm to wall is done with 3 bolts. I have cinder block walls behind drywall -so I used the included anchors. The screws were long enough to easily reach, even though…

Reply to R. Levin Cancel reply

*

%d bloggers like this:
**************